Phase Modulators

Conoptics manufactures a line of laser accessories for laser modulation, driver electronics, beam deflectors, noise reduction and optical isolators. Conoptics’ a pioneer and leader in the manufacturing of optics and laser accessories offers high quality Phase Modulators.

Free Product Whitepapers Download Now

  • This field is for validation purposes and should be left unchanged.

The standard modulators 350, 360, 370, 380 and 390 series are built as intensity modulators with a polarizer aligned to the crystal axis. The same modulators can also be configured for use as polarization rotators, voltage variable wave plates or phase modulators. All of our modulators can be constructed with all the crystals inline such that the full cell is active as a phase modulator, but in this configuration it cannot be used as an intensity modulator, polarization rotator or variable wave plate. Once the modulator is built as a phase modulator it cannot be re-configured as an intensity modulator.

Conoptics’ Phase Modulator

KD*P Series Phase Sensitivity mrad/volt @ 500nm V for ½ Wave Phase Modulator
350-50-LA 3.85 815
350-50 7 450
350-80 12 261
350-105 14.7 225
350-160 24 130
350-210 29 113

 

ADP Series Phase Sensitivity mrad/volt @ 500nm V for ½ Wave Phase Modulator
370-LA 12 262
370 17 184
380 34 90
390 27 115

 

LTA Series Phase Sensitivity mrad/volt @ 830nm V for ½ Wave Phase Modulator
360-40 13 242
360-80 26 120
360-120 39 80
360-160 52 60

Related Products

Model 102  Key Features:

Height Adjustment Range: 2.6 inches (6.6cm)
Lowest Center Line 4.15″, 10.5cm
Highest Center Line 6.75″, 17.2cm
Height without Mounting Rings: Fully Retracted Height 2.30″, 5.8cm
Fully Extended Height 4.90″, 12.4cm
Weight 3.33lbs.
Height with Mounting Rings: (Center of Ring) Fully Retracted Height 3.90″, 9.9cm
Fully Extended Height 6.50″, 16.5cm
Weight 3.95lbs.
Dimensions: (Overall L x W x H) Fully Retracted w/o Rings 10″L x 3.6″W x 2.3″H
25.4cm x9.1cm x 5.8cm
Fully Extended w/o Rings 10″L x 3.6″W x4.9″H
25.4cm x9.1cm x12.4cm
Fully Retracted with Rings 10″L x 3.6″W x 6.3″H
25.4cm x9.1cm x 16cm
Fully Extended with Rings 10″L x 3.6″W x 8.9″H
25.4cm x9.1cm x 22.6cm
Alignment Tool Option: Diameter is 5cm Aperture 2mm

Founded 1981

Over 3 Decades of Service

Customer Satisfaction

Consistently Ranked #1

Made in USA

Proudly Made in the USA

Global Representatives

19 Global Partners