Multiphoton Microscopy –(UV) 325nm-to-525nm

Conoptics manufactures a line of laser accessories for laser modulation, driver electronics, beam deflectors, noise reduction and optical isolators. Conoptics’ a pioneer in the manufacturing of optics and laser accessories has developed a solution for Ultra Violet Multi-Photon Microscopy.

Free Product Whitepapers Download Now

  • This field is for validation purposes and should be left unchanged.

Multiphoton fluorescence microscopy is a powerful research tool that combines the advanced optical techniques of laser scanning microscopy with long wavelength multiphoton fluorescence excitation to capture high-resolution, three-dimensional images of specimens tagged with highly specific fluorophores.

Conoptics’ Model 350-50UV with BK (resonance-dampened) Option is a KD*P Series Electro-Optic modulator. When configured with our Model 302RM amplifier offers the ability to control laser intensity as well as high-speed shuttering. In addition, this solution can control beam attenuation and fly-back blanking with minimal dispersion and full modulation over the lasers bandwidth. The system operates center in/out with no spatial dispersion and rise/fall times of 1 micro-second.

Model 350-50 UV Electro-Optic Modulator

 

Aperture 3.1mm
Dimensions 50mm Diameter x 106mm with Polarizer
Transmission >90%
Standard Wavelength Ranges UV (350nm-515nm)
Piezo Resonances Minimal with clamped version (BK option)
Volts ½ wave @500nm 455volts
Contrast Ratio 500:1
Driver Compatibility Full modulation with M302RM Power Amplifier

Model 302RM Driver

Cabinet Driver and power supply in singe cabinet
Test Feature Built-in test feature allows testing for max transmission of Pockel-Cell without adjusting bias voltage
Input Impedance Choice of amplifier input impedance by rear panel switch (50ohm/1k ohm)
DC Bias Improved DC biasing of Pockel-Cell provides greater linearity at higher bias voltages
Voltage Range +/- 450VDC controlled by ten-turn front panel pot. Digital meter monitors differential bias applied to E.O. Modulator
Linearity 10 bits referenced to full scale (.1%)
Bandwidth DC to >200Khz with 90pf load and 3M (RG-62) cables
Max. Output Drive Level 750VP-P into 90pf load
Amplifier Input Signal 2VP-P max into 50/1k ohms delivers 750VP-P out
Input Power (AC) 60W typical. Input power is both load (modulator) and frequency dependent.
Dimensions 19″ Rack Mountable, 5.25″ H(133mm) (3U) x 14″D (356mm)
Cooling Forced air
Operating Environment Designed for laboratory use (indoor only) Temperature range +5deg C to +50 deg C ambient Humidity 20%-80% RH up to 32deg C Altitude <3000M
Weight 20lbs (9.07kg)

Founded 1981

Over 3 Decades of Service

Customer Satisfaction

Consistently Ranked #1

Made in USA

Proudly Made in the USA

Global Representatives

19 Global Partners