Optical Isolator with input and output polarizer’s pre-aligned to the rotator glass.

  • In this configuration the “input end” is the end with the tuning ring.
  • The input polarizer is aligned for vertical input polarization and the output polarizer is 45 degrees to the input.

Free Product Whitepapers Download Now

  • This field is for validation purposes and should be left unchanged.

Optical Isolator with input and output polarizer’s pre-aligned to the rotator glass.

  • In this configuration the “input end” is the end with the tuning ring.
  • The input polarizer is aligned for vertical input polarization and the output polarizer is 45 degrees to the input.
711C-1 OPTICAL ISOLATOR

MODEL NUMBER

TUNING RANGE

ISOLATION

TRANSMISSION

711C-1 350 TO 390

28 – 30dB

85%

Configuration

Optical Isolator with input and output polarizer’s pre-aligned to the rotator glass.

  • In this configuration the “input end” is the end with the tuning ring.
  • The input polarizer is aligned for vertical input polarization and the output polarizer is 45 degrees to the input.
  • If your source is horizontally polarized, simply remove the two set-screws on the base and rotate the isolator 90 degrees, so that the two tapped holes on the cylinder are aligned with the mounting screws on the base.

Standard optical isolators have the following values :

  • 5mm Aperture
  • Laser Damage Threshold (LTD) – CW Laser 500W/cm2
  • Pulse Laser 150MW/cm2

Conoptics isolators are supplied

  • Faraday Rotator Isolator tuned to 45 degrees
  • (2) Glan Polarizers
  • Mounting Base

Downloads

 

Founded 1981

Over 3 Decades of Service

Customer Satisfaction

Consistently Ranked #1

Made in USA

Proudly Made in the USA

Global Representatives

19 Global Partners