716 (Double) Optical Isolator

Optical Isolator with input and output polarizer’s pre-aligned to the rotator glass.

• In this configuration the “input end” is the end with the tuning ring.
• The input polarizer is aligned for vertical input polarization and the output polarizer is 45 degrees to the input.

Configuration:

• The input polarizer is aligned for vertical input polarization and the output polarizer is vertical.
• If your source is horizontally polarized rotate the isolator 90 degrees.

Conoptics isolators are supplied

• Faraday Rotator Isolator tuned to 45 degrees
• (2) Glan Polarizers
• Mounting Base

Standard optical isolators have the following values :

• 5mm Aperture
• Laser Damage Threshold (LTD) – CW Laser 500W/cm²
• Pulse Laser 150MW/cm²

Downloads

• Optical Isolator Alignment Procedure
• Optical Isolator Tuning Ranges