Model 201 Laser Attenuator / Power Splitter
Designed for use with Ti:Sapphire Lasers
Conoptics has released the Model 201 Laser Attenuator / Power Splitter that permits the end user to split the laser beam exiting the Ti:Sapphire laser into (2) distinct beams and control the power for each instance.
The Model 201 includes a polarizer which is a GLAN type design with an insertion loss < 4% and an extinction ratio of >100,000:1. In addition, the optics are designed so the angle of the escape port beam is fixed and will not change with wavelength variations. The internal achromatic ½ waveplate is also airspaced to allow for increased power and lower dispersion.
The Model 201 is a valuable tool for MPM and Ti:Sapphire implementations.
Specifications:
Aperture: | 8mm |
Dimensions: | 50mm Diameter x 75mm Long |
Transmission: | >90% |
Wavelength Range: | 650nm – 1200nm |
Ports: | (2) Ports, no change in angle with wavelengthBeam block included to terminate beam internally |
Wavefront: | >1/10 Lambda |
Extinction Ratio: | 100,000 : 1 |
Power Capability: | >10 Watt CW |
Optical Components: | Adjustable Achromatic ½ Wave PlateAdjustable Glan Laser Polarizer Escape Port Normal to BeamAll Optics are Air-spaced |
Mode 1: Left/Right (Power Splitter)
Right Output Direction
Mode 2: Attenuator Mode
Left Output Direction
Example: Configuration Setup: