815 Optical Isolator

Conoptics is pleased to announce a new large aperture free-space optical isolators designed for use with Nd:YAG lasers (1064 nm). Optical isolators, also known as Faraday isolators, are magneto-optic devices that preferentially transmit light along a single direction, shielding upstream optics from back reflections. Back reflections can create a number of instabilities in light source.

Free Product Whitepapers Download Now

  • This field is for validation purposes and should be left unchanged.

Conoptics is pleased to announce a new large aperture free-space optical isolators designed for use with Nd:YAG lasers (1064 nm). Optical isolators, also known as Faraday isolators, are magneto-optic devices that preferentially transmit light along a single direction, shielding upstream optics from back reflections. Back reflections can create a number of instabilities in light source.

815 Large Aperture Isolator

MODEL NUMBER

TUNING RANGE

ISOLATION

TRANSMISSION

  815 1020 to 1100nm

>30dB

>92%

Features

  • High Power Capability
  • Minimize Feedback into Optical Systems
  • Free-Space Input and Output Ports
  • Dual Exit Ports
  • Rotatable covers to optionally block rejected beam (if desired)
  • Faraday Rotator Isolator tuned to 45 degrees
  • (2) Glan Polarizers
  • Mounting Base
  • Aperture: 8mm

Damage Threshold (LTD)

CW Laser: 500W/cm2

Pulse Laser: 150MW/cm2

Additional Information (Factory Settings)

 

Optical Isolator input and output polarizers are pre-aligned to the rotator glass.

Input polarizer is aligned for vertical input polarization

Note: If your source is horizontally polarized, remove the two screws on the mounting base and rotate the isolator 90 degrees, re-install screws on the mounting base.

Output polarizer is set to 45 degrees from vertical.

Founded 1981

Over 3 Decades of Service

Customer Satisfaction

Consistently Ranked #1

Made in USA

Proudly Made in the USA

Global Representatives

19 Global Partners