Phase Modulators
Conoptics manufactures a range of laser accessories, including driver electronics, beam deflectors, and noise-reduction tools. As a pioneer in optics and laser accessories, Conoptics offers high-quality Phase Modulators designed for efficient laser modulation.
The standard modulators—models 350, 360, 370, 380, and 390—function as intensity modulators with a polarizer aligned to the crystal axis. Additionally, you can configure these modulators as polarization rotators, voltage variable wave plates, or Phase Modulators.
Furthermore, we construct all our modulators with the crystals aligned to activate the full cell as a phase modulator. However, in this setup, they cannot serve as intensity modulators, polarization rotators, or variable wave plates. Once configured as a phase modulator, you cannot reconfigure them for intensity modulation. Therefore, it is essential to choose the desired configuration carefully.
Conoptics’ Phase Modulators
| KD*P Series | Phase Sensitivity mrad/volt @ 500nm | V for ½ Wave Phase Modulator |
| 350-50-LA | 3.85 | 815 |
| 350-50 | 7 | 450 |
| 350-80 | 12 | 261 |
| 350-105 | 14.7 | 225 |
| 350-160 | 24 | 130 |
| 350-210 | 29 | 113 |
| ADP Series | Phase Sensitivity mrad/volt @ 500nm | V for ½ Wave Phase Modulator |
| 370-LA | 12 | 262 |
| 370 | 17 | 184 |
| 380 | 34 | 90 |
| 390 | 27 | 115 |
| LTA Series | Phase Sensitivity mrad/volt @ 830nm | V for ½ Wave Phase Modulator |
| 360-40 | 13 | 242 |
| 360-80 | 26 | 120 |
| 360-120 | 39 | 80 |
| 360-160 | 52 | 60 |
Related Products
Model 102 Key Features:
| Height Adjustment Range: | 2.6 inches (6.6cm) | |
| Lowest Center Line | 4.15″, 10.5cm | |
| Highest Center Line | 6.75″, 17.2cm | |
| Height without Mounting Rings: | Fully Retracted Height | 2.30″, 5.8cm |
| Fully Extended Height | 4.90″, 12.4cm | |
| Weight | 3.33lbs. | |
| Height with Mounting Rings: (Center of Ring) | Fully Retracted Height | 3.90″, 9.9cm |
| Fully Extended Height | 6.50″, 16.5cm | |
| Weight | 3.95lbs. | |
| Dimensions: (Overall L x W x H) | Fully Retracted w/o Rings | 10″L x 3.6″W x 2.3″H |
| 25.4cm x9.1cm x 5.8cm | ||
| Fully Extended w/o Rings | 10″L x 3.6″W x4.9″H | |
| 25.4cm x9.1cm x12.4cm | ||
| Fully Retracted with Rings | 10″L x 3.6″W x 6.3″H | |
| 25.4cm x9.1cm x 16cm | ||
| Fully Extended with Rings | 10″L x 3.6″W x 8.9″H | |
| 25.4cm x9.1cm x 22.6cm | ||
| Alignment Tool Option: | Diameter is 5cm | Aperture 2mm |
Founded 1981
Over 3 Decades of Service
Customer Satisfaction
Consistently Ranked #1
Made in USA
Proudly Made in the USA
Global Representatives
19 Global PartnersRelated Products
